ВЫПУСКНАЯ ТРУБА СНЯТИЕ

PROCEDURE


  1. REMOVE TAIL EXHAUST PIPE ASSEMBLY


    1. A004WFS

      Remove the 2 bolts and 2 compression springs.

    2. Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports.

    3. Remove the gasket from the front exhaust pipe assembly.

  2. REMOVE FRONT NO. 3 ENGINE UNDER COVER


    1. A004YG5

      Remove the 4 clips and front No. 3 engine under cover.

  3. REMOVE FRONT CENTER FLOOR BRACE


    1. A004Z4C

      Remove the 4 bolts and front center floor brace.

  4. REMOVE HEATED OXYGEN SENSOR

    Click here

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A004WZJ

      Remove the 2 bolts and 2 compression springs.

    2. Remove the front exhaust pipe assembly from the 2 exhaust pipe supports.

    3. Remove the gasket from the exhaust manifold.