АДСОРБЕР СНЯТИЕ

PROCEDURE


  1. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE

    Click here

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY

    Click here

  3. REMOVE FUEL PUMP

    Click here

  4. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY


    1. A004Z3N

      Using a screwdriver with its tip wrapped in protective tape, remove the fuel pressure regulator assembly.

      Note

      Slowly pull out the fuel pressure regulator assembly because the O-ring is firmly installed between the regulator and the fuel filter.

    2. A004XP1E23
      Text in Illustration
      *1 O-ring

      Remove the 2 O-rings from the pressure regulator assembly.