БЛОК ДВИГАТЕЛЯ УСТАНОВКА

PROCEDURE


  1. INSTALL IGNITION COIL ASSEMBLY

    Click here

  2. INSTALL VENTILATION HOSE


    1. Install the ventilation hose to the ventilation valve.

  3. INSTALL EXHAUST MANIFOLD

    Click here

  4. INSTALL MANIFOLD STAY

    Click here

  5. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

    Click here

  6. INSTALL FUEL INJECTOR ASSEMBLY

    Click here

  7. INSTALL NO. 1 DELIVERY PIPE SPACER

    Click here

  8. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY

    Click here

  9. INSTALL FUEL VAPOR FEED PIPE


    1. Install the fuel vapor feed pipe with the bolt.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  10. INSTALL INTAKE MANIFOLD

    Click here

  11. INSTALL WATER BY-PASS PIPE


    1. Install the water by-pass pipe with the 2 bolts and nut.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    2. Connect the 2 water hoses.

  12. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE


    1. Apply a light coat of engine oil to a new O-ring.

    2. Install the O-ring to the engine oil level dipstick guide.

    3. A004YZ0E02

      Install the engine oil level dipstick guide with the 2 bolts.

      Torque:
      Bolt A
      28 N*m  { 286 kgf*cm, 21 ft.*lbf }
      Bolt B
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    4. Connect the clamp to the engine oil level dipstick guide.

    5. Install the oil dipstick.

  13. INSTALL THROTTLE BODY ASSEMBLY

    Click here

  14. INSTALL ENGINE HANGERS


    1. B001LOE

      Install the 2 engine hangers with the 2 bolts.

      Torque:
      43 N*m  { 438 kgf*cm, 32 ft.*lbf }
      Part Name Part No.
      No. 1 engine hanger 12281-37021
      No. 2 engine hanger 12282-37011
      Bolt 91552-81050

  15. REMOVE ENGINE STAND


    1. Remove the engine from the engine stand.