БЛОК ДВИГАТЕЛЯ СНЯТИЕ

PROCEDURE


  1. INSTALL ENGINE STAND


    1. Install the engine onto an engine stand with the bolts.

  2. REMOVE ENGINE HANGERS


    1. B001LOE

      Remove the 2 bolts and 2 engine hangers.

  3. REMOVE THROTTLE BODY ASSEMBLY

    Click here

  4. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    1. Remove the engine oil level dipstick.

    2. A004YZ0

      Remove the 2 bolts, clamp and engine oil level dipstick guide.

    3. Remove the O-ring from the engine oil level dipstick guide.

  5. REMOVE WATER BY-PASS PIPE


    1. A004YOB

      Disconnect the 2 water hoses.

    2. Remove the 2 bolts, nut and water by-pass pipe.

  6. REMOVE INTAKE MANIFOLD

    Click here

  7. REMOVE FUEL VAPOR FEED PIPE


    1. A004ZKR

      Remove the bolt and fuel vapor feed pipe.

  8. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY

    Click here

  9. REMOVE NO. 1 DELIVERY PIPE SPACER

    Click here

  10. REMOVE FUEL INJECTOR ASSEMBLY

    Click here

  11. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

    Click here

  12. REMOVE MANIFOLD STAY

    Click here

  13. REMOVE EXHAUST MANIFOLD

    Click here

  14. REMOVE VENTILATION HOSE


    1. A004WBD

      Remove the ventilation hose from the ventilation valve sub-assembly.

  15. REMOVE IGNITION COIL ASSEMBLY

    Click here