ДАТЧИК ПОЛОЖЕНИЯ РАСПРЕДВАЛА УСТАНОВКА

CAUTION / NOTICE / HINT

Tech Tips

Although the part name refers to the No. 1 crank position sensor, this procedure is for the camshaft position sensor.

PROCEDURE


  1. INSTALL NO. 1 CRANK POSITION SENSOR


    1. B001KU7

      Apply a light coat of engine oil to the O-ring on the No. 1 crank position sensor.

    2. B001MUR

      Install the No. 1 crank position sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    3. Connect the No. 1 crank position sensor connector.

  2. INSPECT FOR ENGINE OIL LEAK

  3. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here