ДАТЧИК СОСТАВА ТОПЛИВОВОЗДУШНОЙ СМЕСИ СНЯТИЕ

PROCEDURE

1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here

2. REMOVE NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL

   Click here

3. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL

   Click here

4. REMOVE COWL BODY MOUNTING REINFORCEMENT LH

   Click here

5. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY

   Click here

6. REMOVE NO. 2 CYLINDER HEAD COVER

   Click here

7. REMOVE AIR FUEL RATIO SENSOR

   
   

   1. 

      Disconnect the air fuel ratio sensor connector and clamp.

   2. 

      Using SST, remove the air fuel ratio sensor.

      SST

      09224-00010