BLACK OUT TAPE(for Rear Door) INSTALLATION

PROCEDURE


  1. REPAIR INSTRUCTION

    Click here

  2. INSTALL REAR DOOR LOWER OUTSIDE STRIPE


    1. Refer to the illustration to position a new rear door lower outside stripe.

      B001L24E01
      Text in Illustration
      *A LH Side *B RH Side
      *a Edge of Curved Surface *b Straight
      *c Cutout - -
      Standard Measurement
      Dimension Measurement
      A 1.5 mm (0.0591 in.)
      B 1.0 mm (0.0394 in.)

    2. Remove the release paper and apply the stripe.

  3. INSTALL REAR DOOR OUTSIDE STRIPE


    1. Refer to the illustration to position a new rear door outside stripe.

      B001MZRE01
      Text in Illustration
      *A LH Side *B RH Side
      *a Edge of Curved Surface *b Straight
      *c Cutout - -
      Standard Measurement
      Dimension Measurement
      A 1.5 mm (0.0591 in.)
      B 1.0 mm (0.0394 in.)

    2. Remove the release paper and apply the stripe.

  4. INSTALL REAR DOOR FRAME GARNISH

    Click here

  5. INSTALL REAR DOOR BELT MOULDING ASSEMBLY

    Click here

  6. INSTALL REAR DOOR GLASS SUB-ASSEMBLY

    Click here

  7. INSTALL REAR DOOR QUARTER WINDOW GLASS

    Click here

  8. INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY

    Click here

  9. INSTALL NO. 1 REAR DOOR VENT SEAL

    Click here

  10. INSTALL REAR DOOR GLASS RUN

    Click here

  11. INSTALL REAR DOOR WEATHERSTRIP

    Click here

  12. INSTALL REAR DOOR CHECK ASSEMBLY

    Click here

  13. INSTALL REAR DOOR SERVICE HOLE COVER

    Click here

  14. INSTALL REAR DOOR TRIM BRACKET

    Click here

  15. INSTALL REAR DOOR SPEAKER COVER (w/o Rear Speaker)

    Click here

  16. INSTALL REAR SPEAKER ASSEMBLY (w/ Rear Speaker)

    Click here

  17. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP

    Click here

  18. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  19. INSTALL REAR DOOR ARMREST COVER

    Click here

  20. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

    Click here

  21. INSTALL REAR DOOR REAR FRAME BRACKET

    Click here

  22. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  24. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

    Click here

  25. INSTALL DECK FLOOR BOX RH

    Click here

  26. INSTALL REAR NO. 3 FLOOR BOARD

    Click here

  27. INSTALL REAR DECK FLOOR BOX

    Click here

  28. INSTALL REAR NO. 2 FLOOR BOARD

    Click here

  29. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here