PROCEDURE
PRECAUTION
Note
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.
REMOVE REAR NO. 2 FLOOR BOARD
REMOVE REAR DECK FLOOR BOX
REMOVE REAR NO. 3 FLOOR BOARD
REMOVE DECK FLOOR BOX RH
REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG
REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH
REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)
REMOVE DOOR ARMREST COVER (for Driver Side)
REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Driver Side)
REMOVE DOOR ASSIST GRIP COVER (for Front Passenger Side)
REMOVE DOOR ASSIST GRIP ASSEMBLY (for Front Passenger Side)
REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)
REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Front Passenger Side)
REMOVE FRONT DOOR TRIM BRACKET (for Driver Side)
REMOVE FRONT DOOR TRIM BRACKET (for Front Passenger Side)
REMOVE FRONT DOOR SERVICE HOLE COVER
REMOVE FRONT DOOR GLASS SUB-ASSEMBLY
REMOVE FRONT DOOR GLASS RUN
REMOVE FRONT DOOR FRONT LOWER FRAME UPPER COVER
REMOVE FRONT DOOR BELT MOULDING ASSEMBLY
REMOVE FRONT DOOR CHECK ASSEMBLY
REMOVE FRONT DOOR WEATHERSTRIP
REMOVE DOOR FRAME GARNISH
REMOVE FRONT DOOR OUTSIDE STRIPE
Using a heat light, heat the front door outside stripe and vehicle body.
| Item | Temperature |
|---|---|
| Vehicle Body and Front Door Outside Stripe | 40 to 60°C (104 to 140°F) |
Note
Do not heat the vehicle body excessively.
Pull back on one of the ends of the front door outside stripe to remove it.
Tech Tips
When pulling on the stripe, pull it parallel to the body.
REMOVE FRONT DOOR REAR OUTSIDE STRIPE
Using a heat light, heat the front door rear outside stripe and vehicle body.
| Item | Temperature |
|---|---|
| Vehicle Body and Front Door Rear Outside Stripe | 40 to 60°C (104 to 140°F) |
Note
Do not heat the vehicle body excessively.
Pull back on one of the ends of the front door rear outside stripe to remove it.
Tech Tips
When pulling on the stripe, pull it parallel to the body.