WINDSHIELD OUTSIDE MOULDING INSTALLATION

PROCEDURE

1. INSTALL WINDSHIELD NO. 1 OUTSIDE MOULDING CLIP

   
   

   1. 

      Using an air riveter or a hand riveter with a nose piece, install the 5 windshield No. 1 outside moulding clips with 5 new rivets.

      Tech Tips

      If the mandrel of the rivet does not come off on the first operation of the rivet gun, slide the rivet gun forward on the mandrel and operate it again.

      Note

      
      

      • 

        Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

        Text in Illustration

        *1	Riveter
        *2	Mandrel
        *a	Incorrect

      • 

        Confirm that the rivets are seated properly against the roof drip side finish moulding clip.

        Text in Illustration

        *1	Riveter
        *a	Incorrect

      • Do not tilt the riveter when installing the rivet to the roof drip side finish moulding clip.

      • Do not leave any clearance between the rivet head and roof drip side finish moulding clip.

      • 

        Do not leave any clearance between the roof drip side finish moulding clip and front pillar. Firmly hold the 2 items together while installing the rivet.

        Text in Illustration

        *1	Riveter
        *a	Incorrect

2. INSTALL WINDSHIELD GLASS

   
   

   1. Install the windshield glass Click here.

3. INSTALL WINDSHIELD OUTSIDE MOULDING

   
   

   1. 

      Engage the guide and 10 claws to install the windshield outside moulding.

4. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

   Click here

5. INSTALL FRONT NO. 2 SIDE PANEL PROTECTOR LH

   Click here

6. INSTALL FRONT NO. 2 SIDE PANEL PROTECTOR RH

   Click here

7. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH

   Click here

8. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH

   Click here

9. INSTALL FRONT WIPER ARM HEAD CAP

   Click here