ROCKER PANEL MOULDING INSTALLATION

PROCEDURE

1. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY

   
   

   1. Install 9 new clips (rocker panel moulding clips) to the body rocker panel moulding assembly as shown in the illustration.

      

   2. Engage the 9 clips to install the body rocker panel moulding assembly.

      Tech Tips

      Install the front side body rocker panel moulding assembly inside the front fender liner.

   3. Install the 4 clips (No. 2 side mudguard retainers) and 3 clips (side mudguard retainers).

   4. Install the 2 screws.

   5. Using a 4 mm hexagon wrench, install the hexagon screw.

   6. 

      Engage the 2 claws and install the rocker panel moulding cover.

      Tech Tips

      Use the same procedure for the front side and rear side.

   7. Install the new grommet.

   8. Using a 4 mm hexagon wrench, install the 3 hexagon screws.

2. INSTALL REAR WHEEL HOUSE FRONT PLATE

   Click here