ROCKER PANEL MOULDING REMOVAL

PROCEDURE


  1. REMOVE REAR WHEEL HOUSE FRONT PLATE

    Click here

  2. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY


    1. A004WFQE04
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the body rocker panel moulding assembly.

    2. A004WDC

      Using a 4 mm hexagon wrench, remove the 3 hexagon screws.

    3. A004XHQ

      Remove the grommet.

    4. A004XD9E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws and remove the rocker panel moulding cover.

      Tech Tips

      Use the same procedure for the front side and rear side.

    5. A004VXD

      Using a 4 mm hexagon wrench, remove the hexagon screw.

    6. A004X8X

      Remove the 2 screws.

    7. A004VL4

      Remove the 3 clips (side mudguard retainers).

    8. Remove the 4 clips (No. 2 side mudguard retainers).

    9. A004YX8

      Disengage the 9 clips to remove the body rocker panel moulding assembly.

    10. Remove the 9 clips (rocker panel moulding clips) as shown in the illustration.

      A004VZH