NAME PLATE INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate or Emblem 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, name plates or emblem excessively.

PROCEDURE


  1. INSTALL SYMBOL EMBLEM


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new symbol emblem.


      1. Using a heat light, heat the vehicle body and symbol emblem.

      2. Remove the release paper from the symbol emblem.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the symbol emblem.

        A004Y91E01
        Text in Illustration
        *1 Location Pin - -

  2. INSTALL NO. 1 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 1 back door name plate.


      1. Using a heat light, heat the vehicle body and No. 1 back door name plate.

      2. Remove the release paper from the No. 1 back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 1 back door name plate.

        A004X2NE03
        Text in Illustration
        *1 Profile of Back Door Panel - -
        Reference Measurement
        Area Measurement
        A 30.7 mm (1.21 in.)
        B 66.9 mm (2.63 in.)
        C 131.1 mm (5.16 in.)

  3. INSTALL NO. 2 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 2 back door name plate.


      1. Using a heat light, heat the vehicle body and No. 2 back door name plate.

      2. Remove the release paper from the No. 2 back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 2 back door name plate.

        A004ZWHE03
        Text in Illustration
        *1 Profile of Back Door Panel - -
        Reference Measurement
        Area Measurement
        A 29.7 mm (1.17 in.)
        B 65.0 mm (2.56 in.)
        C 130.6 mm (5.14 in.)

  4. INSTALL BODY SIDE NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new body side name plates.


      1. Using a heat light, heat the vehicle body and body side name plate.

      2. Remove the release paper from the body side name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the body side name plate.

        A004ZP4E05
        Text in Illustration
        *1 Profile of Rear Door Panel - -
        Reference Measurement
        Area Measurement
        A 34.2 mm (1.35 in.)
        B 47.7 mm (1.88 in.)
        C 52.6 mm (2.07 in.)

        Tech Tips

        Use the same procedure for the RH side and LH side.

  5. INSTALL NO. 2 FRONT FENDER NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 2 front fender name plate.


      1. Using a heat light, heat the vehicle body and No. 2 front fender name plate.

      2. Remove the release paper from the No. 2 front fender name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 2 front fender name plate.

        B001KJRE05
        Text in Illustration
        *1 Profile of Front Fender Panel - -
        Reference Measurement
        Area Measurement
        A 47.2 mm (1.86 in.)
        B 112.1 mm (4.41 in.)
        C 55.8 mm (2.20 in.)
        D 54 mm (2.13 in.)

  6. INSTALL NO. 1 FRONT FENDER NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 1 front fender name plate.


      1. Using a heat light, heat the vehicle body and No. 1 front fender name plate.

      2. Remove the release paper from the No. 1 front fender name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 1 front fender name plate.

        A004Y06E05
        Text in Illustration
        *1 Profile of Front Fender Panel - -
        Reference Measurement
        Area Measurement
        A 47.2 mm (1.86 in.)
        B 112.1 mm (4.41 in.)
        C 55.8 mm (2.20 in.)
        D 54 mm (2.13 in.)