REAR BUMPER REMOVAL

PROCEDURE


  1. REMOVE REAR BUMPER PIECE

    Tech Tips

    Use the same procedure for the RH side and LH side.


    1. B001L8QC01
      B001MUK Protective Tape

      Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws.

    2. Disengage the hook to remove the rear bumper piece.

  2. REMOVE REAR BUMPER ASSEMBLY


    1. B001LMIC01
      B001MUK Protective Tape

      Apply protective tape around the rear bumper assembly as shown in the illustration.

    2. B001M4H

      w/ Floor Under Cover:


      1. Remove the 2 clips.

    3. B001M4O

      Using a clip remover, remove the 6 clips.

    4. Remove the 2 screws.

    5. B001M5I

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. B001N85

      Disengage the 3 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. B001KSV

      Disengage the 4 claws as shown in the illustration.

    8. w/ LEXUS Parking Assist-sensor System:


      1. Disconnect the connector.

    9. Remove the rear bumper assembly.