FRONT BUMPER INSTALLATION

PROCEDURE


  1. INSTALL FRONT BUMPER ASSEMBLY


    1. w/ Headlight Cleaner System:


      1. Connect the washer hose to the windshield washer motor and pump assembly.

    2. w/ LEXUS Parking Assist-sensor System:


      1. Connect the connector.

        Note

        Do not apply excessive force when pulling back the front bumper assembly.

    3. w/ Fog Light:


      1. Connect the 2 connectors.

        Note

        Do not apply excessive force when pulling back the front bumper assembly.

    4. w/ LEXUS Parking Assist-sensor System and w/ Fog Light:


      1. Connect the 3 connectors.

        Note

        Do not apply excessive force when pulling back the front bumper assembly.

    5. A004ZO9

      Engage the 2 claws and install the front bumper assembly as shown in the illustration.

    6. A004YE6

      Engage the 2 claws to install the front bumper assembly as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. Install the 2 clips.

    8. Install the 2 bolts.

    9. Install the 6 screws.

    10. Install the front bumper seal bracket.

      Note

      Do not pull the front bumper assembly after the front bumper seal bracket is installed, or the front bumper assembly may be damaged.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    11. Install the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    12. B001MB2E02
      Text in Illustration
      *1 Pin Hold Clip
      *a Correct
      *b Incorrect

      Install the 2 pin hold clips.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. INSTALL HOOD CENTER CUSHION


    1. Install the 2 hood center cushions.

  3. INSTALL RADIATOR SUPPORT OPENING COVER


    1. Install the radiator support opening cover with the 7 clips.

  4. INSTALL FRONT SPOILER COVER (w/ Front Spoiler)

    Click here

  5. ADD WASHER FLUID (w/ Headlight Cleaner System)

    Click here

  6. ADJUST FOG LIGHT ASSEMBLY (w/ Fog Light)

    Click here