VEHICLE APPROACHING SPEAKER SWITCH INSPECTION

PROCEDURE


  1. INSPECT VEHICLE APPROACHING SPEAKER SWITCH


    1. A004WGAE01
      Text in Illustration
      *a

      Component without harness connected

      (Vehicle Approaching Speaker Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      11 - 8 Pressed Below 1 Ω
      Not pressed 10 kΩ or higher

      If the result is not as specified, replace the vehicle approaching speaker switch.

    2. Illumination Inspection


      1. Apply auxiliary battery voltage to the vehicle approaching speaker switch and check that the switch illuminates.

        OK
        Condition Specified Condition

        Auxiliary battery positive (+) → Terminal 10

        Auxiliary battery negative (-) → Terminal 9

        		 Illuminates

        If the result is not as specified, replace the vehicle approaching speaker switch.

    3. Indicator Inspection


      1. Apply auxiliary battery voltage to the vehicle approaching speaker switch and check that the indicator illuminates.

        OK
        Condition Specified Condition

        Auxiliary battery positive (+) → Terminal 8

        Auxiliary battery negative (-) → Terminal 12

        		 Illuminates

        If the result is not as specified, replace the vehicle approaching speaker switch.