HEADLIGHT LEVELING ECU(for RHD) INSTALLATION

PROCEDURE

1. INSTALL HEADLIGHT LEVELING ECU ASSEMBLY

   
   

   1. Engage the guide.

   2. Install the headlight leveling ECU assembly with the nut.

   3. Connect the connector.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

   Tech Tips

   Use the same procedure for the RH side and LH side Click here.

3. INSTALL INSTRUMENT SIDE PANEL RH

   Click here

4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

   Click here

5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

7. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

   Click here

8. INSTALL DECK FLOOR BOX RH

   Click here

9. INSTALL REAR NO. 3 FLOOR BOARD

   Click here

10. INSTALL REAR DECK FLOOR BOX

    Click here

11. INSTALL REAR NO. 2 FLOOR BOARD

    Click here

12. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION

    Click here

13. ADJUST HEADLIGHT AIMING

    Click here