HEIGHT CONTROL SENSOR INSTALLATION

PROCEDURE

1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

   
   

   1. Engage the 2 guides and install the rear height control sensor sub-assembly with the 2 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Connect the connector.

   3. Engage the clamp.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

3. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

   Click here

4. INSTALL DECK FLOOR BOX RH

   Click here

5. INSTALL REAR NO. 3 FLOOR BOARD

   Click here

6. INSTALL REAR DECK FLOOR BOX

   Click here

7. INSTALL REAR NO. 2 FLOOR BOARD

   Click here

8. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION

   Click here

9. ADJUST HEADLIGHT AIMING

   Click here