AUTOMATIC HIGH BEAM MAIN SWITCH REMOVAL

PROCEDURE


  1. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

    Click here

  2. REMOVE INSTRUMENT SIDE PANEL

    Click here

  3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

    Click here

  4. REMOVE AUTO HIGH BEAM SWITCH (for LHD)


    1. w/o Vehicle Proximity Notification System:


      1. B001LPC

        Disengage the 2 claws to remove the auto high beam switch as shown in the illustration.

    2. w/ Vehicle Proximity Notification System:


      1. B001MS1

        Disengage the 2 claws to remove the auto high beam switch as shown in the illustration.

  5. REMOVE AUTO HIGH BEAM SWITCH (for RHD)


    1. B001MED

      Disengage the 2 claws to remove the auto high beam switch as shown in the illustration.