REAR LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL REAR LIGHT ASSEMBLY


    1. B001KLWC01
      *a Nut (A)
      *b Nut (B)

      Install the rear light assembly with the 3 nuts.

      Torque:
      Nut (A)
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }
      Nut (B)
      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

    2. Connect the connector and engage the clamp.

  2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  3. INSTALL BACK DOOR SIDE GARNISH LH

    Click here

  4. INSTALL BACK DOOR SIDE GARNISH RH

    Click here

  5. INSTALL UPPER BACK DOOR TRIM PANEL ASSEMBLY

    Click here