REAR COMBINATION LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

    B001M3HC02
    *a

    Component without harness connected

    (Rear Combination Light Assembly LH)

    1. Apply auxiliary battery voltage to the rear combination light assembly LH and check that the lights illuminate.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 1 (TL)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 Taillight and side marker light* illuminate

      Auxiliary battery positive (+) → Terminal 2 (STP)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 Stop light illuminates

      Auxiliary battery positive (+) → Terminal 4 (TRN)

      Auxiliary battery positive (+) → Terminal 6 (TRN2)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 Turn signal light illuminates

      • *: w/ Rear Side Marker Light

      If the result is not as specified, replace the rear combination light assembly LH.

  2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

    B001M3HC02
    *a

    Component without harness connected

    (Rear Combination Light Assembly RH)

    1. Apply auxiliary battery voltage to the rear combination light assembly RH and check that the lights illuminate.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 1 (TL)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 Taillight and side marker light* illuminate

      Auxiliary battery positive (+) → Terminal 2 (STP)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 Stop light illuminates

      Auxiliary battery positive (+) → Terminal 4 (TRN)

      Auxiliary battery positive (+) → Terminal 6 (TRN2)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 Turn signal light illuminates

      • *: w/ Rear Side Marker Light

      If the result is not as specified, replace the rear combination light assembly RH.