REAR COMBINATION LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE REAR NO. 2 FLOOR BOARD

    Click here

  2. REMOVE REAR DECK FLOOR BOX

    Click here

  3. REMOVE REAR NO. 3 FLOOR BOARD

    Click here

  4. REMOVE DECK FLOOR BOX RH

    Click here

  5. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE (for RH Side)

    Click here

  6. REMOVE REAR SEAT CUSHION ASSEMBLY

    Click here

  7. REMOVE REAR SEAT CUSHION LOCK HOOK

    Click here

  8. REMOVE REAR SEATBACK ASSEMBLY LH (for LH Side)

    Click here

  9. REMOVE REAR SEATBACK ASSEMBLY RH (for RH Side)

    Click here

  10. REMOVE REAR NO. 4 FLOOR BOARD (w/o Woofer)

    Click here

  11. REMOVE REAR NO. 4 FLOOR BOARD (w/ Woofer)

    Click here

  12. REMOVE DECK FLOOR BOX LH (w/o Woofer)

    Click here

  13. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  14. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY

    Click here

  15. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY

    Click here

  16. REMOVE REAR NO. 1 FLOOR BOARD

    Click here

  17. REMOVE DECK TRIM SERVICE HOLE COVER

    Click here

  18. REMOVE REAR DECK TRIM COVER

    Click here

  19. REMOVE REAR DOOR SCUFF PLATE

    Click here

  20. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP


    1. Disconnect the rear door opening trim weatherstrip.

  21. REMOVE REAR SEAT SIDE COVER RH (for RH Side)

    Click here

  22. REMOVE REAR SEAT SIDE GARNISH

    Click here

  23. REMOVE ROPE HOOK ASSEMBLY

    Click here

  24. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

  25. REMOVE TONNEAU COVER HOOK

    Click here

  26. REMOVE TONNEAU COVER HOLDER CAP

    Click here

  27. REMOVE NO. 2 ROOM LIGHT ASSEMBLY (for RH Side)

    Click here

  28. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY

    Click here

  29. REMOVE DECK TRIM SIDE PANEL ASSEMBLY

    Click here

  30. REMOVE REAR COMBINATION LIGHT COVER


    1. B001L1S

      Using a moulding remover, disengage the 2 claws as shown in the illustration.

    2. B001LSP

      Disengage the 3 claws to remove the rear combination light cover as shown in the illustration.

  31. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    1. B001MZN

      Using a clip remover, disengage the clamp.

    2. Disconnect the connector.

    3. Disengage the grommet and remove the rear combination light socket and wire sub-assembly.

    4. B001LALC01
      *a Guide
      *b Pin

      Remove the 2 screws.

    5. Pull the rear combination light assembly toward the rear of the vehicle to disengage the pin and 3 guides and remove the rear combination light assembly.

      Note

      To prevent the rear combination light assembly from falling when disengaging the pin and guides, lightly hold the rear combination light assembly.

  32. REMOVE REAR BUMPER ASSEMBLY

    Click here

  33. REMOVE REAR UPPER BUMPER RETAINER


    1. B001N8B

      Remove the screw and rear upper bumper retainer.