REAR COMBINATION LIGHT ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE REAR LIGHT COVER


    1. A004ZXYE03
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 6 claws and remove the 2 rear light covers.

  2. REMOVE REAR COMBINATION LIGHT LENS AND BODY


    1. A004VM5E02
      Text in Illustration
      *1 Guide
      *2 Pin

      Remove the 2 screws.

    2. Disengage the pin and 3 guides and remove the rear combination light assembly.

    3. A004Z7J

      Turn the rear turn signal light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

    4. A004XS0

      Using a screwdriver, disengage the clamp.

    5. Disconnect the connector and remove the rear combination light lens and body.

  3. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

  4. REMOVE REAR BUMPER ASSEMBLY

    Click here

  5. REMOVE REAR UPPER BUMPER RETAINER


    1. B001N8B

      Remove the screw and rear upper bumper retainer.

  6. REMOVE REAR DOOR SCUFF PLATE

    Click here

  7. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP

    Click here

  8. REMOVE REAR SEAT CUSHION ASSEMBLY

    Click here

  9. REMOVE REAR SEAT CUSHION LOCK HOOK

    Click here

  10. REMOVE REAR SEATBACK ASSEMBLY LH (for LH Side)

    Click here

  11. REMOVE REAR SEATBACK ASSEMBLY RH (for RH Side)

    Click here

  12. REMOVE REAR NO. 2 FLOOR BOARD

    Click here

  13. REMOVE REAR DECK FLOOR BOX

    Click here

  14. REMOVE REAR NO. 3 FLOOR BOARD

    Click here

  15. REMOVE DECK FLOOR BOX RH

    Click here

  16. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE (for RH Side)

    Click here

  17. REMOVE REAR NO. 4 FLOOR BOARD (w/o Woofer)

    Click here

  18. REMOVE REAR NO. 4 FLOOR BOARD (w/ Woofer)

    Click here

  19. REMOVE DECK FLOOR BOX LH (w/o Woofer)

    Click here

  20. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  21. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY

    Click here

  22. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY

    Click here

  23. REMOVE REAR NO. 1 FLOOR BOARD

    Click here

  24. REMOVE DECK TRIM SERVICE HOLE COVER

    Click here

  25. REMOVE REAR DECK TRIM COVER

    Click here

  26. REMOVE REAR SEAT SIDE COVER RH (for RH Side)

    Click here

  27. REMOVE REAR SEAT SIDE GARNISH

    Click here

  28. REMOVE ROPE HOOK ASSEMBLY

    Click here

  29. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

  30. REMOVE TONNEAU COVER HOOK

    Click here

  31. REMOVE TONNEAU COVER HOLDER CAP

    Click here

  32. REMOVE NO. 2 ROOM LIGHT ASSEMBLY (for RH Side)

    Click here

  33. REMOVE DECK TRIM SIDE PANEL ASSEMBLY

    Click here

  34. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. B001MZN

      Using a clip remover, disengage the clamp.

    2. Disconnect the connector.

    3. Disengage the grommet and remove the rear combination light socket and wire sub-assembly.