HEADLIGHT ASSEMBLY(for LED Headlight) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY


    1. Connect each connector.

    2. Engage the clamp.

    3. Engage the claw.

    4. Install the headlight assembly with the bolt and 2 screws.

      Torque:
      Bolt
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

  2. INSTALL FRONT FENDER SIDE PANEL PROTECTOR

    Click here

  3. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  4. ADJUST HEADLIGHT AIMING

    Click here