HEADLIGHT ASSEMBLY(for LED Headlight) INSTALLATION

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY


    1. Connect each connector.

    2. Engage the clamp.

    3. A004YG7E02

      Engage the claw.

    4. Install the headlight assembly with the bolt and 2 screws.

      Torque:
      Screw (A)
      1.4 N*m  { 14 kgf*cm, 12 in.*lbf }
      Bolt (B)
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  2. INSTALL FRONT FENDER SIDE PANEL PROTECTOR

    Click here

  3. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

    Click here

  6. INSTALL DECK FLOOR BOX RH

    Click here

  7. INSTALL REAR NO. 3 FLOOR BOARD

    Click here

  8. INSTALL REAR DECK FLOOR BOX

    Click here

  9. INSTALL REAR NO. 2 FLOOR BOARD

    Click here

  10. ADJUST HEADLIGHT AIMING

    Click here