HEADLIGHT ASSEMBLY(for LED Headlight) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Click here.

  2. REMOVE REAR NO. 2 FLOOR BOARD

    Click here

  3. REMOVE REAR DECK FLOOR BOX

    Click here

  4. REMOVE REAR NO. 3 FLOOR BOARD

    Click here

  5. REMOVE DECK FLOOR BOX RH

    Click here

  6. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE

    Click here

  7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  9. REMOVE FRONT FENDER SIDE PANEL PROTECTOR

    Click here

  10. REMOVE HEADLIGHT ASSEMBLY


    1. A004YG7

      Remove the bolt and 2 screws.

    2. Disengage the claw.

    3. A004WTF

      Disengage the clamp.

    4. Disconnect each connector and remove the headlight assembly.