RAIN SENSOR REMOVAL

PROCEDURE

1. REMOVE RAIN SENSOR COVER

   
   

   1. 

      Disengage the 2 guides and disconnect the rain sensor cover as shown in the illustration.

   2. Disengage the 2 claws and remove the rain sensor cover.

2. REMOVE RAIN SENSOR

   
   

   1. 

      Disconnect the connector.

   2. 

      Text in Illustration

      *1

      Stopper

      Release the stopper by pulling the stopper down and disconnect the rain sensor as shown in the illustration.

3. CLEAN WINDSHIELD GLASS

   Tech Tips

   
   

   • Rain sensor tape is reusable. Only replace the tape if it is damaged or contaminated.

   • Check that there is no rain sensor tape residue remaining on the windshield glass. If there is, remove the residue before installing the rain sensor.