WASHER NOZZLE(for Rear Side) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT REAR WASHER NOZZLE


    1. With the power switch on (READY), check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

      Standard
      Washer fluid hits the windshield in the area shown in the illustration.
      A004W69E01
      Standard Clearance
      Area Measurement
      A 22 mm (0.866 in.)
      B 6 mm (0.236 in.)
      C 72 mm (2.835 in.)
      D 108 mm (4.252 in.)