WASHER NOZZLE(for Front Side) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the power switch on (READY), check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.
      A004WISE02
      Standard Clearance
      Area Measurement Area Measurement
      A 122.2 mm (4.811 in.) B 462.9 mm (1.52 ft.)
      C 192.4 mm (7.575 in.) D 36.8 mm (1.449 in.)
      Text in Illustration
      *1 Upper Limit *2 Standard
      *3 Lower Limit - -

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.