LIGHTING SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE LIGHTING SYSTEM

   Tech Tips

   The following items can be customized.

   Note

   
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Be sure to make a note of the current settings before customizing.

   • When troubleshooting a function, first make sure that the function is set to the default setting.

   
   

   1. Customizing with the intelligent tester

      
      

      1. Connect the intelligent tester to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus:

         
         

         1. for Illuminated Entry: Body / Main Body / Utility / Customize / Illuminated Entry.

         2. for Light Control: Body / Main Body / Utility / Customize / Light Control.

      5. Select the setting by referring to the table below.

         Illuminated Entry

         Display	Default	Content	Setting	Relevant ECU
         Mirr-Foot-Lgt Approached	ON	Lights up the door mirror foot lights when a key enters any actuation area around the doors.	ON or OFF	Main Body ECU (Multiplex Network Body ECU)
         Mirr-Foot-Lgt Unlocked	ON	Lights up the door mirror foot lights when doors are unlocked using a mechanical key or door control transmitter.	ON or OFF
         Mirror Foot Lighting Time	15 s	Changes the lighting time of the door mirror foot lights.	7.5 s, 15 s, 30 s or 0 s*1
         Exterior Light Control	ON	Changes the door mirror foot light control.	ON or OFF

         
         

         • *1: Even if "0 s" is selected, it cannot be set.

         Light Control

         Display	Default	Content	Setting	Relevant ECU
         Response Time*1	Normal	Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position	Normal or Long	Main Body ECU (Multiplex Network Body ECU)
         Disp Ex ON Sen	Normal	Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.	Light2, Light1, Normal, Dark1 or Dark2
         Disp Ex OFF Sen	Normal	Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.	Light2, Light1, Normal, Dark1 or Dark2
         Sensitivity	Normal	Adjusts the sensitivity of the automatic light control system.	Light2, Light1, Normal, Dark1 or Dark2
         DRL Function*2	ON	ON/OFF of the DRL function	ON or OFF
         Follow Me Home Lighting Time*3	30 s	Sets the headlight lighting time after the power switch is turned off.	30 s, 60 s, 90 s, 120 s
         Light up Clearance Lights at Door Unlock Function	ON	Turns on the parking lights, taillights, license plate lights and interior lights (switch illumination, etc.) for 15 seconds when the doors are unlocked by the smart key or wireless key.	ON or OFF
         Lane CHG Flash CNT	3 times	Changes the lane change signal flashing times	OFF, 3 times, 5 times, 7 times, 9 times or 11 times

         
         

         • *1: except European Models and South Africa

         • *2: for China

         • *3: w/ Follow Me Home Control

   2. Customizing with the multi-display (w/ Multi-display)

      
      

      1. Turn the power switch on (IG).

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Light settings.

      3. Select the setting by referring to the table below.

         Light settings

         Display	Default	Content	Setting	Relevant ECU
         Light sensor sensitivity	0	Adjusts the sensitivity of the automatic light control system.*1	-2, -1, 0, +1 or +2	Main Body ECU (Multiplex Network Body ECU)
         Daytime running lights*2	On	ON/OFF of the DRL function	On or Off
         Exterior lights off timer	15 sec.	Changes the lighting time of the door mirror foot lights.	Off, 7.5 sec., 15 sec. or 30 sec.

         Other vehicle settings

         Display	Default	Content	Setting	Relevant ECU
         Lane change signal flashes	3	Changes the lane change signal flashing times	OFF, 3, 5, 7, 9, or 11	Main Body ECU (Multiplex Network Body ECU)

         
         

         • *1: The higher the setting value is, the more the lights come on easily.

         • *2: for China

   3. Customizing with the combination meter assembly (for Monochrome Type)

      Tech Tips

      
      

      • Press and hold DISP (steering pad switch) when entering an item.

      • Briefly press DISP (steering pad switch) when selecting an item.

      
      

      1. Turn the power switch on (IG).

      2. Enter the following menus: SETTINGS / VEHICLE SETTINGS.

      3. Select the setting by referring to the table below.

         Display	Default	Content	Setting	Relevant ECU
         LIGHT SENSOR SENSITIVITY	0 (Standard)	Adjusts the sensitivity of the automatic light control system.*1	-2, -1, 0, 1 or 2	Main Body ECU (Multiplex Network Body ECU)
         DAYTIME RUNNING LIGHTS*3	ON	ON/OFF of the DRL function	ON or OFF
         EXTERIOR LIGHTS OFF TIME ADJUSTMENT	15 s	Changes the lighting time of the door mirror foot lights.	7.5 s, 15 s, 30 s or OFF*2

         
         

         • *1: The higher the setting value is, the more the lights come on easily.

         • *2: Even if "OFF" is selected, it cannot be set.

         • *3: for China