FRONT WIPER MOTOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WIPER ARM HEAD CAP


    1. A004VFBE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the 3 claws and remove the front wiper arm head cap.

      Tech Tips


      • Tape the screwdriver tip before use.

      • Use the same procedure for the RH side and LH side.

  2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH


    1. A004Y7G

      Remove the nut and the front wiper arm and blade assembly LH.

  3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH


    1. A004ZMA

      Remove the nut and the front wiper arm and blade assembly RH.

  4. REMOVE FRONT NO. 2 SIDE PANEL PROTECTOR LH


    1. A004Z6ZE01
      Text in Illustration
      *1 Double-sided Tape

      Disengage the clip and guide, and remove the front No. 2 side panel protector LH.

  5. REMOVE FRONT NO. 2 SIDE PANEL PROTECTOR RH

    Tech Tips

    Use the same procedure as for the LH side.

  6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY


    1. A004ZOG

      Remove the 2 clips.

    2. Disengage the 6 claws and guide as shown in the illustration.

      A004Z65

    3. Disengage the 7 guides and pull out the cowl top ventilator louver sub-assembly as shown in the illustration.

      A004VQ8

  7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. Operate the wiper and stop the windshield wiper motor at the automatic stop position.

    2. A004XZ2

      Disengage the 4 clamps.

    3. Remove the 2 bolts.

    4. A004VF4E01
      Text in Illustration
      *1 Motor Grommet

      Disengage the motor grommet and remove the windshield wiper motor and link assembly as shown in the illustration.

      Note

      Be careful not to damage the windshield when removing the windshield wiper motor and link assembly.

    5. A00501Y

      Disconnect the connector.

  8. REMOVE FRONT WIPER CRANK SUB-ASSEMBLY


    1. A0050B7E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, separate the No. 1 rod from the crank arm pivot of the front wiper crank sub-assembly as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A004WFH

      Remove the nut and the front wiper crank sub-assembly.

  9. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY


    1. A004YNF

      Remove the 3 bolts and the windshield wiper motor assembly.