OUTER MIRROR SWITCH INSPECTION

PROCEDURE


  1. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Memory)


    1. B001KVRE01
      Text in Illustration
      *1 Mirror Adjust Switch
      *2 Mirror Select Switch
      *a

      Component without harness connected

      (Outer Mirror Switch Assembly)

      Check the switch functions (w/ retract mirror).


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        H136-8 (M+) - H136-6 (E) Mirror adjust switch pressed up 90 to 110 Ω
        Mirror adjust switch pressed down 437 to 503 Ω
        Mirror adjust switch pressed left 744 to 856 Ω
        Mirror adjust switch pressed right 225 to 275 Ω
        Mirror adjust switch not pressed 10 kΩ or higher
        H136-3 (MSW) - H136-6 (E) Mirror select switch R Below 10 Ω
        Mirror select switch L 90 to 110 Ω
        Mirror select switch off 10 kΩ or higher

        If the result is not as specified, replace the outer mirror switch assembly.

    2. B001MHXE01
      Text in Illustration
      *a

      Component without harness connected

      (Outer Mirror Switch Assembly)

      Check that the LED illuminates (w/ retract mirror).


      1. Apply auxiliary battery voltage to the outer mirror switch assembly and check that the LED illuminates.

        Standard
        Measurement Condition Specified Condition

        Auxiliary battery positive (+) → H136-9 (ILL+)

        Auxiliary battery negative (-) → H136-1 (ILL-)

        		 LED illuminates

        If the result is not as specified, replace the outer mirror switch assembly.

    3. Check retractable outer mirror switch function.


      1. B001LPZE01
        Text in Illustration
        *a

        Component without harness connected

        (Retractable Outer Mirror Switch)

        Measure the resistance according to the value in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        H137-2 (MR) - H137-3 (E) Retract position Below 1 Ω
        H137-2 (MR) - H137-3 (E) Except retract position 10 kΩ or higher
        H137-8 (MF) - H137-3 (E) Return position 10 kΩ or higher
        H137-8 (MF) - H137-3 (E) Retract position 10 kΩ or higher
        H137-2 (MR) - H137-3 (E) AUTO position Below 1 Ω

        If the result is not as specified, replace the retractable outer mirror switch.

      2. Check that the LED illuminates (w/ retract mirror).

      3. B001LEKE01
        Text in Illustration
        *a

        Component without harness connected

        (Retractable Outer Mirror Switch)

        Apply auxiliary battery voltage to the outer mirror switch assembly and check that the LED illuminates.

        Standard
        Measurement Condition Specified Condition

        Auxiliary battery positive (+) → H137-1 (ILL+)

        Auxiliary battery negative (-) → H137-4 (ILL-)

        		 LED illuminates

        If the result is not as specified, replace the retractable outer mirror switch.

    4. Check the switch functions (w/o retract mirror).


      1. B001MNCE02
        Text in Illustration
        *1 Mirror Adjust Switch
        *2 Mirror Select Switch
        *a

        Component without harness connected

        (Outer Mirror Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        H37-16 (M+) - H37-14 (E) Mirror adjust switch pressed up 90 to 110 Ω
        Mirror adjust switch pressed down 437 to 503 Ω
        Mirror adjust switch pressed left 744 to 856 Ω
        Mirror adjust switch pressed right 255 to 275 Ω
        Mirror adjust switch not pressed 10 kΩ or higher
        H37-13 (MSW) - H37-14 (E) Mirror select switch L 90 to 110 Ω
        Mirror select switch R Below 1 Ω
        Mirror select switch off 10 kΩ or higher

        If the result is not as specified, replace the outer mirror switch assembly.

    5. Check that the LED illuminates (w/o retract mirror).


      1. B001KZ3E02
        Text in Illustration
        *a

        Component without harness connected

        (Outer Mirror Switch Assembly)

        Apply auxiliary battery voltage to the outer mirror switch assembly and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Auxiliary battery positive (+) → H37-23 (ILL+)

        Auxiliary battery negative (-) → H37-24 (ILL-)

        		 LED illuminates

  2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Memory)


    1. B001KDUE02
      Text in Illustration
      *1 Mirror Adjust Switch
      *2 Mirror Select Switch
      *a

      Component without harness connected

      (Outer Mirror Switch Assembly)

      Check the switch functions.


      1. Move the mirror select switch to the L position.

      2. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        H38-11 (B) - H38-9 (VL) Mirror adjust switch pressed up Below 1 Ω
        H38-12 (E) - H38-6 (M+) Mirror adjust switch pressed up Below 1 Ω
        H38-11 (B) - H38-6 (M+) Mirror adjust switch pressed down Below 1 Ω
        H38-12 (E) - H38-9 (VL) Mirror adjust switch pressed down Below 1 Ω
        H38-11 (B) - H38-10 (HL) Mirror adjust switch pressed left Below 1 Ω
        H38-12 (E) - H38-6 (M+) Mirror adjust switch pressed left Below 1 Ω
        H38-11 (B) - H38-6 (M+) Mirror adjust switch pressed right Below 1 Ω
        H38-12 (E) - H38-10 (HL) Mirror adjust switch pressed right Below 1 Ω
        H38-11 (B) - H38-12 (E) Always 10 kΩ or higher

      3. Move the mirror select switch to the R position.

      4. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        H38-11 (B) - H38-8 (VR) Mirror adjust switch pressed up Below 1 Ω
        H38-12 (E) - H38-6 (M+) Mirror adjust switch pressed up Below 1 Ω
        H38-11 (B) - H38-6 (M+) Mirror adjust switch pressed down Below 1 Ω
        H38-12 (E) - H38-8 (VR) Mirror adjust switch pressed down Below 1 Ω
        H38-11 (B) - H38-7 (RH) Mirror adjust switch pressed left Below 1 Ω
        H38-12 (E) - H38-6 (M+) Mirror adjust switch pressed left Below 1 Ω
        H38-11 (B) - H38-6 (M+) Mirror adjust switch pressed right Below 1 Ω
        H38-12 (E) - H38-7 (RH) Mirror adjust switch pressed right Below 1 Ω
        H38-11 (B) - H38-12 (E) Always 10 kΩ or higher

        If the result is not as specified, replace the outer mirror switch assembly.

    2. B001LP0E01
      Text in Illustration
      *a

      Component without harness connected

      (Outer Mirror Switch Assembly)

      Check that the LED illuminates.


      1. Apply auxiliary battery voltage to the outer mirror switch assembly and check that the LED illuminates.

        Standard
        Measurement Condition Specified Condition

        Auxiliary battery positive (+) → H38-15 (ILL+)

        Auxiliary battery negative (-) → H38-16 (ILL-)

        		 LED illuminates

        If the result is not as specified, replace the outer mirror switch assembly.