OUTER REAR VIEW MIRROR GLASS INSPECTION

PROCEDURE


  1. INSPECT OUTER MIRROR RH


    1. B001L31E02
      Text in Illustration
      *a

      Component without harness connected

      (Outer Mirror RH)

      Remove the outer mirror RH Click here.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 25°C (77°F) 7.6 to 11.4 Ω

      If the result is not as specified, replace the outer mirror RH.

  2. INSPECT OUTER MIRROR LH


    1. B001KESE02
      Text in Illustration
      *a

      Component without harness connected

      (Outer Mirror LH)

      Remove the outer mirror LH Click here.

    2. Measure the resistance according the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 25°C (77°F) 7.6 to 11.4 Ω

      If the result is not as specified, replace the outer mirror LH.