WIPER SWITCH REMOVAL

PROCEDURE


  1. REMOVE STEERING COLUMN COVER

    Note

    Removing the lower steering column cover in the incorrect order will cause the parts to break.


    1. Release the tilt and telescopic lever, and fully extend and lower the steering column assembly.

    2. Lock the tilt and telescopic lever.

    3. A004W63

      Turn the steering wheel assembly to the left and remove the screw.

    4. A004ZUQ

      Turn the steering wheel assembly to the right and remove the screw.

    5. A004ZLL

      Push the right and left sides of the lower steering column cover to disengage the 4 claws.

    6. A004Y7P

      Insert your fingers into the opening of the tilt lever of the lower steering column cover to disengage the 2 claws.

      Tech Tips

      Spread the claws to disengage them.

    7. A004WF2

      Disengage the 4 clips and 2 guides to separate the instrument panel cluster finish panel from the upper steering column cover.

    8. A004X1V

      Disengage the 2 claws and remove the upper steering column cover.

  2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A004YJO

      Disconnect each connector.

    2. Disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

      Note

      If the claw is pushed with excessive force, it may break.