BACK DOOR OPENER SWITCH INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY


    1. Check operation of the opener switch.


      1. B001LQ6E02
        Text in Illustration
        *a

        Component without harness connected

        (Back Door Opener Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Position Specified Condition
        2 (E) - 3 (UL) Back door opener switch assembly (opener switch) not pushed (OFF) 10 kΩ or higher
        2 (E) - 3 (UL) Back door opener switch assembly (opener switch) pushed (ON) Below 1 Ω

        If the result is not specified, replace the back door opener switch assembly.

    2. Check operation of the lock switch (w/ Entry Function).


      1. A004YUPE02
        Text in Illustration
        *a

        Component without harness connected

        (Back Door Opener Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Position Specified Condition
        1 (L) - 2 (E) Back door opener switch assembly (lock switch) not pushed (OFF) 10 kΩ or higher
        1 (L) - 2 (E) Back door opener switch assembly (lock switch) pushed (ON) Below 1 Ω

        If the result is not specified, replace the back door opener switch assembly.