HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE FRONT WHEEL LH (for LHD)

  3. REMOVE FRONT FENDER LINER LH (for LHD)

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  4. REMOVE FRONT WHEEL RH (for RHD)

  5. REMOVE FRONT FENDER LINER RH (for RHD)

    Click here

  6. REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)

    Click here

  7. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for LHD)

    Click here

  8. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  9. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  10. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD)

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  11. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Click here

  12. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  13. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. B001MKY

      Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.

  14. REMOVE HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch)


    1. B001NB4E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the hood lock nut cap.

      Tech Tips

      Tape the screwdriver tip before use.

    2. B001KYRE01
      Text in Illustration
      *1 Hood Lock Bolt

      Remove the 2 bolts and hood lock bolt.

    3. for LHD:


      1. B001MK0

        Disconnect the hood lock control cable and remove the hood lock assembly.

    4. For RHD:


      1. B001MM9

        Disconnect the hood lock control cable and remove the hood lock assembly.

  15. REMOVE HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch)


    1. B001KIQE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the hood lock nut cap.

      Tech Tips

      Tape the screwdriver tip before use.

    2. B001MLEE01
      Text in Illustration
      *1 Hood Lock Bolt

      Disconnect the connector.

    3. Disengage the clamp.

    4. Remove the 2 bolts and hood lock bolt.

    5. for LHD:


      1. B001MAE

        Disconnect the hood lock control cable and remove the hood lock assembly.

    6. For RHD:


      1. B001KFY

        Disconnect the hood lock control cable and remove the hood lock assembly.

  16. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)


    1. Using a screwdriver, disengage each clamp shown in the illustration.

      B001LTZE01
      Text in Illustration
      *1 Hood Lock Control Cable *2 Grommet
      *3 Hood Cable Grommet - -

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the hood lock control cable assembly from the engine compartment and remove it.

  17. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)


    1. Using a screwdriver, disengage each clamp shown in the illustration.

      B001L2YE01
      Text in Illustration
      *1 Hood Lock Control Cable *2 Grommet
      *3 Hood Cable Grommet - -

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the hood lock control cable assembly from the engine compartment and remove it.