SLIDING ROOF HOUSING REASSEMBLY

PROCEDURE


  1. INSTALL SUNSHADE TRIM SUB-ASSEMBLY


    1. A00509D

      Insert the sunshade trim into the sliding roof housing sub-assembly.

    2. A004Y39

      Install the sliding roof piece sub-assembly LH with the screw.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. INSTALL SLIDING ROOF DRIVE GEAR ASSEMBLY


    1. A004ZNL

      Install the sliding roof drive gear assembly with the 2 bolts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }