SLIDING ROOF HOUSING DISASSEMBLY

PROCEDURE


  1. REMOVE SLIDING ROOF DRIVE GEAR ASSEMBLY


    1. A004ZNL

      Remove the 2 bolts and sliding roof drive gear assembly.

      Note

      To prevent the sliding roof glass and sliding roof drive gear from being displaced, fully close the sliding roof glass (sliding roof drive cable), and then remove the sliding roof drive gear.

  2. REMOVE SUNSHADE TRIM SUB-ASSEMBLY


    1. A004Y39

      Remove the screw and sliding roof piece sub-assembly LH.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    2. A0050C9

      Slide and remove the sunshade trim sub-assembly from the sliding roof housing sub-assembly.