QUARTER WINDOW GLASS REMOVAL

PROCEDURE


  1. REMOVE REAR DOOR SCUFF PLATE

    Click here

  2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP

    Click here

  3. REMOVE REAR SEAT CUSHION ASSEMBLY

    Click here

  4. REMOVE REAR SEAT CUSHION LOCK HOOK

    Click here

  5. REMOVE REAR SEATBACK ASSEMBLY LH (for LH Side)

    Click here

  6. REMOVE REAR SEATBACK ASSEMBLY RH (for RH Side)

    Click here

  7. REMOVE REAR NO. 2 FLOOR BOARD

    Click here

  8. REMOVE REAR DECK FLOOR BOX

    Click here

  9. REMOVE REAR NO. 3 FLOOR BOARD

    Click here

  10. REMOVE DECK FLOOR BOX RH

    Click here

  11. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE (for RH Side)

    Click here

  12. REMOVE REAR NO. 4 FLOOR BOARD (w/o Woofer)

    Click here

  13. REMOVE REAR NO. 4 FLOOR BOARD (w/ Woofer)

    Click here

  14. REMOVE DECK FLOOR BOX LH (w/o Woofer)

    Click here

  15. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  16. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY

    Click here

  17. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY

    Click here

  18. REMOVE REAR NO. 1 FLOOR BOARD

    Click here

  19. REMOVE DECK TRIM SERVICE HOLE COVER

    Click here

  20. REMOVE REAR DECK TRIM COVER

    Click here

  21. REMOVE REAR SEAT SIDE COVER RH (for RH Side)

    Click here

  22. REMOVE REAR SEAT SIDE GARNISH

    Click here

  23. REMOVE ROPE HOOK ASSEMBLY

    Click here

  24. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

  25. REMOVE TONNEAU COVER HOOK

    Click here

  26. REMOVE TONNEAU COVER HOLDER CAP

    Click here

  27. REMOVE NO. 2 ROOM LIGHT ASSEMBLY (for RH Side)

    Click here

  28. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY

    Click here

  29. REMOVE DECK TRIM SIDE PANEL ASSEMBLY

    Click here

  30. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY

    Click here

  31. REMOVE QUARTER WINDOW ASSEMBLY


    1. B001KJ4E02
      Text in Illustration
      *1 Protective Tape

      Apply protective tape to the outer surface of the vehicle body to prevent scratches.

    2. B001LW0E02
      Text in Illustration
      *1 Piano Wire

      Pass a piano wire between the vehicle body and glass as shown in the illustration.

    3. Tie both wire ends to wooden blocks or similar objects that can serve as handles.

      Note

      When separating the quarter window assembly from the vehicle, be careful not to damage the paint or interior and exterior ornaments.

    4. Cut off the adhesive by pulling the piano wire around the quarter window assembly.

      Note

      Leave as much adhesive on the vehicle body as possible when cutting through the adhesive.

    5. B001KYB

      Using suction cups, disengage the 2 clips and remove the quarter window assembly.

      Note

      Be careful not to drop the quarter window assembly.

  32. CLEAN VEHICLE BODY


    1. B001LCGE51
      Text in Illustration
      *1 Adhesive
      *2 Vehicle Body

      Clean and shape the contact surfaces of the vehicle body.


      1. Using a knife, cut away excess adhesive on the contact surfaces of the vehicle body as shown in the illustration.

        Note

        Be careful not to damage the vehicle body.

        Tech Tips

        Leave as much adhesive on the vehicle body as possible.

    2. Clean the contact surfaces of the vehicle body with a piece of cloth saturated with cleaner.

      Tech Tips

      Even if all the adhesive has been removed, clean the vehicle body.