WINDOW DEFOGGER WIRE REPAIR

PROCEDURE


  1. REPAIR REAR WINDOW DEFOGGER WIRE (BACK DOOR GLASS)

    A004Y6AE39
    Text in Illustration
    *1 Masking Tape
    *2 Repair Point
    *3 Broken Wire

    1. Clean the broken wire tips with a grease, wax and silicone remover.

    2. Place masking tape along both sides of the wire.

    3. A004WO1

      Thoroughly mix the repair agent (Dupont paste No. 4817 or equivalent).

    4. Using a fine tip brush, apply a small amount of the agent to the wire.

    5. After a few minutes, remove the masking tape.

      Note

      Do not use the rear window defogger for at least 24 hours after performing the repair.