REAR POWER WINDOW SWITCH INSPECTION

PROCEDURE


  1. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for LH Side)


    1. A004VI2E13
      Text in Illustration
      *a

      Component without harness connected

      (Rear Power Window Regulator Switch Assembly (for LH Side))

      Check the switch function.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        6 (UP) - 1 (GND) Auto up or up position Below 1 Ω
        7 (DOWN) - 1 (GND) Auto down or down position Below 1 Ω
        8 (AUTO) - 1 (GND) Auto up or auto down position Below 1 Ω
        6 (UP) - 1 (GND) Free 10 kΩ or higher
        7 (DOWN) - 1 (GND) Free 10 kΩ or higher
        8 (AUTO) - 1 (GND) Free 10 kΩ or higher

        If the result is not as specified, replace the rear power window regulator switch assembly (for LH side).

    2. A004VI2E12
      Text in Illustration
      *a

      Component without harness connected

      (Rear Power Window Regulator Switch Assembly (for LH Side))
      *b LED

      Check that the LED illuminates.


      1. Apply auxiliary battery voltage to the rear power window regulator switch assembly and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Auxiliary battery positive (+) → 4 (LED)

        Auxiliary battery negative (-) → 1 (GND)

        		 LED illuminates

        If the result is not as specified, replace the rear power window regulator switch assembly (for LH side).

  2. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for RH Side)


    1. A004VI2E13
      Text in Illustration
      *a

      Component without harness connected

      (Rear Power Window Regulator Switch Assembly (for RH Side))

      Check the switch function.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        6 (UP) - 1 (GND) Auto up or up position Below 1 Ω
        7 (DOWN) - 1 (GND) Auto down or down position Below 1 Ω
        8 (AUTO) - 1 (GND) Auto up or auto down position Below 1 Ω
        6 (UP) - 1 (GND) Free 10 kΩ or higher
        7 (DOWN) - 1 (GND) Free 10 kΩ or higher
        8 (AUTO) - 1 (GND) Free 10 kΩ or higher

        If the result is not as specified, replace the rear power window regulator switch assembly (for RH side).

    2. A004VI2E12
      Text in Illustration
      *a

      Component without harness connected

      (Rear Power Window Regulator Switch Assembly (for RH Side))
      *b LED

      Check that the LED illuminates.


      1. Apply auxiliary battery voltage to the rear power window regulator switch assembly and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Auxiliary battery positive (+) → 4 (LED)

        Auxiliary battery negative (-) → 1 (GND)

        		 LED illuminates

        If the result is not as specified, replace the rear power window regulator switch assembly (for RH side).