POWER WINDOW REGULATOR MOTOR(for Front Door) INSTALLATION

PROCEDURE

1. INSTALL FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY

   Note

   The regulator arm must be below the intermediate position when installing the power window regulator motor.

   
   

   1. Using a T25 "TORX" socket wrench, install the front power window regulator motor assembly with the 3 screws.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Tech Tips

      A new front window regulator uses self-tapping screws to thread new installation holes when the self-tapping screws are inserted.

2. INSTALL FRONT DOOR WINDOW REGULATOR ASSEMBLY

   Click here

3. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

   Click here

4. INSTALL FRONT DOOR SERVICE HOLE COVER

   Click here

5. INSTALL FRONT DOOR TRIM BRACKET (for Driver Side)

   Click here

6. INSTALL FRONT DOOR TRIM BRACKET (for Front Passenger Side)

   Click here

7. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Driver Side)

   Click here

8. INSTALL DOOR ARMREST COVER (for Driver Side)

   Click here

9. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

   Click here

10. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Front Passenger Side)

    Click here

11. INSTALL DOOR ASSIST GRIP ASSEMBLY (for Front Passenger Side)

    Click here

12. INSTALL DOOR ASSIST GRIP COVER (for Front Passenger Side)

    Click here

13. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

14. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH

    Click here

15. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

17. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

    Click here

18. INSTALL DECK FLOOR BOX RH

    Click here

19. INSTALL REAR NO. 3 FLOOR BOARD

    Click here

20. INSTALL REAR DECK FLOOR BOX

    Click here

21. INSTALL REAR NO. 2 FLOOR BOARD

    Click here

22. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here