POWER WINDOW REGULATOR MOTOR(for Front Door) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Click here.

  2. REMOVE REAR NO. 2 FLOOR BOARD

    Click here

  3. REMOVE REAR DECK FLOOR BOX

    Click here

  4. REMOVE REAR NO. 3 FLOOR BOARD

    Click here

  5. REMOVE DECK FLOOR BOX RH

    Click here

  6. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE

    Click here

  7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  9. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH

    Click here

  10. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

  11. REMOVE DOOR ARMREST COVER (for Driver Side)

    Click here

  12. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Driver Side)

    Click here

  13. REMOVE DOOR ASSIST GRIP COVER (for Front Passenger Side)

    Click here

  14. REMOVE DOOR ASSIST GRIP ASSEMBLY (for Front Passenger Side)

    Click here

  15. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  16. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Front Passenger Side)

    Click here

  17. REMOVE FRONT DOOR TRIM BRACKET (for Driver Side)

    Click here

  18. REMOVE FRONT DOOR TRIM BRACKET (for Front Passenger Side)

    Click here

  19. REMOVE FRONT DOOR SERVICE HOLE COVER

    Click here

  20. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  21. REMOVE FRONT DOOR WINDOW REGULATOR ASSEMBLY

    Click here

  22. REMOVE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY


    1. B001KZX

      Using a T25 "TORX" socket wrench, remove the 3 screws and front power window regulator motor assembly.