UPPER INSTRUMENT PANEL DISASSEMBLY

PROCEDURE


  1. REMOVE AUTOMATIC LIGHT CONTROL SENSOR

    Click here

  2. REMOVE NO. 1 DEFROSTER NOZZLE GARNISH


    1. Using a moulding remover, disengage the 8 claws.

      B001M9Y

    2. Disengage the 8 guides and remove the No. 1 defroster nozzle garnish.

  3. REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY


    1. B001N1R

      Remove the 3 screws <B>.

    2. Disengage the claw and remove the No. 1 heater to register duct sub-assembly.

  4. REMOVE NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY

    Tech Tips

    Use the same procedure described for the No. 1 heater to register duct sub-assembly.

  5. REMOVE DEFROSTER NOZZLE ASSEMBLY


    1. B001L98

      Remove the 3 screws <B> and defroster nozzle assembly.

  6. REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

    for LHD: Click here

    for RHD: Click here

  7. REMOVE NO. 2 INSTRUMENT PANEL WIRE


    1. Using a clip remover, disengage each clamp and remove the No. 2 instrument panel wire.

      B001KDL

  8. REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

    Click here