AIR CONDITIONING PANEL REMOVAL

PROCEDURE


  1. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

    Tech Tips

    Use the same procedure for the RH and LH side Click here.

  2. REMOVE INSTRUMENT SIDE PANEL

    Click here

  3. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Metal Finish Panel and Urethane Panel)

    Click here

  4. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Wood Panel and Bamboo Panel)

    Click here

  5. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

  6. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    1. B001KXJ

      Disengage the 7 claws and remove the air conditioning control assembly as shown in the illustration.

    2. Disconnect the connector.

  7. REMOVE LOWER HEATER CONTROL BASE


    1. B001NBI

      Remove the 8 screws and remove the lower heater control base.

  8. REMOVE CENTER CLUSTER MODULE CIRCUIT

    Note

    When disassembling the center cluster module circuit, eliminate static electricity by touching the vehicle body to prevent electrical components from being damaged.


    1. B001KHC

      Disengage the 2 guides and remove the center cluster module circuit.