HUMIDITY SENSOR INSTALLATION

PROCEDURE


  1. INSTALL HUMIDITY SENSOR


    1. B001KBNE01
      Text in Illustration
      *1 Stopper
      *2 Bracket

      Engage the 2 guides, and carefully install the humidity sensor to the glass surface, preventing air bubbles from forming between the contact surfaces.

    2. Push in the stopper.

    3. Connect the connector.

  2. INSTALL PROTECTOR (w/o Pre-collision System)


    1. B001KQ7

      Engage the 2 claws and temporarily install the protector.

    2. Slide the protector and engage the 2 guides as shown in the illustration to install the protector.

  3. INSTALL PROTECTOR (w/ Pre-collision System)


    1. Engage the 2 claws to install the protector.