HUMIDITY SENSOR REMOVAL

PROCEDURE


  1. REMOVE PROTECTOR (w/o Pre-collision System)


    1. B001MYM

      Disengage the 2 guides and slide the protector as shown in the illustration.

    2. Disengage the 2 claws and remove the protector.

  2. REMOVE PROTECTOR (w/ Pre-collision System)


    1. B001MO9

      Disengage the 2 claws and remove the protector.

  3. REMOVE HUMIDITY SENSOR


    1. B001LQX

      Disconnect the connector.

    2. B001MEAE01
      Text in Illustration
      *1 Stopper

      Release the stopper by pulling it down.

    3. Remove the humidity sensor as shown in the illustration.