FRONT BLOWER MOTOR REMOVAL

PROCEDURE


  1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  2. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Click here

  3. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY (w/o PTC Heater)


    1. B001MX9

      Disengage the clamp and disconnect the connector.

    2. Remove the 3 screws and front blower motor sub-assembly.

      Note

      Do not reuse the front blower motor sub-assembly if it has been damaged or received an impact.

  4. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY (w/ PTC Heater)


    1. Remove the felt tape to the extent that the screw can be removed.

    2. B001N8IE03
      Text in Illustration
      *a Quick Heater Connector

      Remove the screw and disconnect the quick heater connector.

    3. Disengage the clamp and disconnect the connector.

    4. Remove the 3 screws and front blower motor sub-assembly.

      Note

      Do not reuse the front blower motor sub-assembly if it has been damaged or received an impact.