AIR CONDITIONING SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE


  1. CUSTOMIZE AIR CONDITIONING SYSTEM


    1. Customizing with the intelligent tester

      Note


      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.

      Tech Tips

      The following items can be customized.


      1. Connect the intelligent tester to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Body / Air Conditioner / Utility / Customize.

      5. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Set Temperature Shift Normal Function to perform control with the shifted temperature versus the displayed temperature +2 C, +1 C, Normal, -1 C or -2 C Air conditioning amplifier assembly
        Compressor Mode Automatic Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off Manual or Automatic Air conditioning amplifier assembly
        Air Inlet Mode Automatic Function to change the mode automatically to recirculation air mode when turning the air conditioning on to cool the cabin quickly Manual or Automatic Air conditioning amplifier assembly
        Foot/DEF Auto Mode ON Function to turn the airflow to foot/defroster automatically when AUTO mode is on OFF or ON Air conditioning amplifier assembly
        Foot/DEF Automatic Blow Up Function ON Function to increase the blower level automatically when the defroster is on OFF or ON Air conditioning amplifier assembly
        Ambient Temperature Shift Normal Function to display the shifted ambient temperature versus the actual ambient temperature +3 C, +2 C, +1 C, Normal, -1 C, -2 C or -3 C Air conditioning amplifier assembly
        ECO MODE Cancel OFF Function to cancel the ECO mode drive when the item is set to ON OFF or ON Air conditioning amplifier assembly
        Noise and Vibration Reduction OFF Function to change the speed of the compressor when the item is set to ON OFF or ON Air conditioning amplifier assembly
    2. Customizing with Multi-display (w/ Multi-display)


      1. Turn the power switch on (IG).

      2. Select the following menus: Setup / Vehicle / Vehicle customization / Climate settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Auto A/C Mode Automatic Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off Manual or Automatic Air conditioning amplifier assembly
        Efficient Ventilation Mode Automatic Function to change the mode automatically to recirculation air mode when turning the air conditioning on to cool the cabin quickly Manual or Automatic Air conditioning amplifier assembly
    3. Customizing with the combination meter assembly (w/o Multi-display)

      Tech Tips


      • Press and hold DISP switch (steering pad switch assembly) when entering an item.

      • Briefly press DISP switch (steering pad switch assembly) when selecting an item.


      1. Turn the power switch on (IG).

      2. Enter the following menus: Settings / Vehicle Settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Auto A/C Mode Automatic Function to change the mode automatically to recirculation air mode when turning the air conditioning on to cool the cabin quickly Manual or Automatic Air conditioning amplifier assembly
      4. Press and hold DISP switch (steering pad switch assembly).

      5. The setting completion screen will be displayed.

      6. Return to the item selection screen.