OCCUPANT DETECTION SENSOR(for Power Seat) INSTALLATION

PROCEDURE


  1. INSTALL OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)


    1. A004WU4

      Using hog ring pliers, install the occupant detection sensor (separate type front seat cushion pad) to the separate type front seat cushion cover with 21 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

    2. A004XCG

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

    Tech Tips

    Use the same procedure as for the driver side Click here.

  3. INSTALL FRONT SEAT CUSHION INNER SHIELD

    Tech Tips

    Use the same procedure as for the driver side Click here.

  4. INSTALL FRONT SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver side Click here.

  5. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver side Click here.

  6. INSTALL RECLINING POWER SEAT SWITCH KNOB

    Tech Tips

    Use the same procedure as for the driver side Click here.

  7. INSTALL SLIDE POWER SEAT SWITCH KNOB

    Tech Tips

    Use the same procedure as for the driver side Click here.

  8. INSTALL FRONT SEAT INNER BELT ASSEMBLY

    Click here

  9. INSTALL FRONT SEAT ASSEMBLY

    Tech Tips

    Use the same procedure as for the driver side Click here.