OCCUPANT DETECTION SENSOR(for Manual Seat) INSTALLATION

PROCEDURE

1. INSTALL OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)

   
   

   1. 

      Using hog ring pliers, install the occupant detection sensor (separate type front seat cushion pad) to the separate type front seat cushion cover with 21 new hog rings.

      Note

      
      

      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

   2. 

      Using hog ring pliers, install 2 new hog rings.

      Note

      Be careful not to damage the cover.

2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

   Tech Tips

   Use the same procedure as for the driver side Click here.

3. INSTALL FRONT SEAT INNER CUSHION SHIELD

   Tech Tips

   Use the same procedure as for the driver side Click here.

4. INSTALL FRONT SEAT INNER BELT ASSEMBLY

   Click here

5. INSTALL FRONT SEAT CUSHION SHIELD

   Tech Tips

   Use the same procedure as for the driver side Click here.

6. INSTALL RECLINING ADJUSTER RELEASE HANDLE

   Tech Tips

   Use the same procedure as for the driver side Click here.

7. INSTALL FRONT SEAT ASSEMBLY

   Click here